Skip to Content

Carbon Fiber Parts

High-Quality Carbon Fiber Body Kits by Own Silent International Limited

Own Silent International Limited employs a meticulous process to create high-quality carbon fiber body kits for premium cars. The steps involved include:


1. Design and Engineering

  • CAD Modeling: Detailed designs are created using Computer-Aided Design (CAD) software, specifying exact dimensions and properties.
  • Structural Analysis: Designs undergo structural analysis to ensure they can handle the stresses and loads in use.

2. Pattern and Mold Creation

  • Pattern Making: A master pattern or plug is created from materials like foam or clay, serving as the foundation for the mold.
  • Mold Fabrication: A mold is crafted from the master pattern using materials such as fiberglass or metal.

3. Carbon Fiber Layup

  • Prepreg Material Preparation: Carbon fiber sheets impregnated with resin (prepreg) are cut to the required shape and size.
  • Layering: Multiple layers of carbon fiber prepreg are carefully laid into the mold according to design specifications.

4. Vacuum Bagging

  • Sealing: The mold with the carbon fiber layup is covered with a vacuum bag, sealed around the edges.
  • Vacuum Application: Air is removed to create a vacuum, compressing the carbon fiber layers tightly against the mold.

5. Curing

  • Heat and Pressure Application: The vacuum-bagged mold is placed in an autoclave or oven, where it is subjected to high temperature and pressure to harden the resin.
  • Post-Curing: Additional curing at lower temperatures may be done to achieve optimal strength.

6. Trimming and Finishing

  • Demolding: The cured part is carefully removed from the mold.
  • Trimming: Excess material is trimmed off using precision tools.
  • Surface Finishing: The part is sanded, polished, and may receive a clear coat for protection and aesthetics.

7. Quality Inspection

  • Dimensional Inspection: The part is measured to ensure it meets design specifications.
  • Non-Destructive Testing (NDT): Techniques like ultrasonic testing are used to check for internal defects.
  • Load Testing: Some parts undergo mechanical testing to ensure they can withstand the required loads.

8. Assembly and Installation

  • Fitting: The carbon fiber part is fitted to the car, ensuring perfect alignment with other components.
  • Installation: The part is installed using bonding or fasteners, depending on the application.

This rigorous process ensures that Own Silent International Limited produces carbon fiber body kits that are lightweight, strong, and precisely manufactured to the highest standards for premium vehicles.